3Rd. Longshan Environmental Technology Park, Zhangqiu District, JiNan, Shandong, China [email protected]
For carbon plants, achieving ultra-low emissions is no longer only about controlling particulate matter, sulfur dioxide (SO₂) and nitrogen oxides (NOₓ). Ammonia slip and the disposal of desulfurization gypsum are becoming increasingly important considerations in environmental compliance and operating costs.
A 2026 local emission requirement in Jingzhou specifies an ammonia slip limit of no more than 3 mg/m³ for ammonia-based desulfurization systems and 8 mg/m³ for SCR and SNCR denitrification systems. For carbon plants using ammonia injection for NOₓ control, managing ammonia slip has become a significant technical challenge.
Excess ammonia can react with SO₃ and SO₂ in lower-temperature sections of the flue gas treatment system, forming ammonium bisulfate. This can block catalyst pores and downstream equipment, increasing system resistance and affecting operating stability.
Meanwhile, conventional limestone-gypsum and dual-alkali FGD systems generate by-products that require further disposal. Dust and calcined coke powder can mix with the gypsum, affecting product quality and making it more difficult to find reliable buyers in the building-materials market.
Ammonia-based flue gas desulfurization provides an alternative. By using ammonia water to absorb SO₂, the process produces ammonium sulfite, which can be oxidized, concentrated and crystallized into ammonium sulfate fertilizer.
This changes the by-product utilization route from dependence on local gypsum disposal channels to potential access to the broader agricultural fertilizer market, provided the ammonium sulfate meets relevant quality standards.
Ammonia recovery is also an important part of system design. MirShine Group's staged separation and purification ammonia desulfurization and dust removal technology incorporates ammonia washing and recovery into the treatment process, providing an integrated approach to sulfur dioxide removal, ammonia utilization and ammonia slip control.
MirShine Group has completed an ammonia-based FGD ultra-low-emission project in the carbon industry. The practice demonstrates an alternative approach for plants seeking to address both desulfurization by-product disposal and increasingly stringent ammonia slip requirements.
For carbon producers, the focus is shifting from simply removing sulfur dioxide to evaluating the entire process, including ammonia recovery, by-product utilization and long-term operating costs.